Modules are supplied with pattress fixing screws but are not supplied with IDRANet plugs (CON0002). Visit the Accessories page for more information.
	DFP002 : Multifunction Display Panel
		15 x Push Button Inputs
		15 x Blue / Red backlights with brightness control
		64 x 128 Pixel LCD display
		LCD has RGB backlight and brightness control
		2 x Concealed Tactile Buttons (e.g. for volume control)
		PIR Detector 5m Range, 82°V x 100°H
		Light Level Sensor (8bit)
		Temperature Sensor (13bit, 0.03125°C res., +/-0.5°C)
		Relative Humidity sensor (12bit, +/-2%)
		2 x Independent Digital Inputs
		4 x Relay drive outputs (suitable for 2 x XRM-001 Modules)
		IR Receiver trainable to most handsets
		16 x Onboard stores for arbitrary frame sets
		IR Transmitter for control of 3rd party appliances
		140 onboard stores for arbitrary frame sets
		RC5 decoding / Direct synthesis of RC5 codes
		'Hands Free' networked intercom :
			Uses IDRANet audio bus allowing multi-way conversations
			Network controllable: Hands free, receive only, transmit only
			Network and locally controllable volume level
		2 x Independent chronometers (with leap year correction)
		2 x Independent interval timers
		44 x different event triggers
		Fully IDRANet compatible
		Click arrow to download datasheet

	PCA001 : PC/IDRANet RS232 + Audio Interface
		Standard 9 Way RS232 Serial Port (Male)
		Note: Connection to a PC must be made via the IDRATEK Cable (CBA-001),
		and not a standard serial cable.
		IDRANet/RS232 indicator LEDs
		Baud rate selectable RS232 interface (to 56.7Kbaud) with CTS handshake
		Module reset via RS232 signal line
		5 data bus interface settings including: Pass through, filtered, snoop,
		gateway
		Audio bus output interface with digital gain control and isolation switch
		Audio bus input interface with digital gain control
		Audio bus mean level threshold sense with digital threshold setting
		Updateable firmware allows improvement upgrades
		Fully IDRANet Compatible
		Status indicator LED
		Click arrow to download datasheet