Modules are supplied with pattress fixing screws but are not supplied with IDRANet plugs (CON0002). Visit the Accessories page for more information.
	IRM001 : Infrared Receiver
		Can be trained to recognise (for Reflex) up to 16 arbitrary frame codes from
		most standard handheld IR control units
		Incoming frame data can be relayed to networked IR TX capable modules to
		provide ‘remote control extender’ functions. Relay addressing user definable.
		Recognition / relay functions operate simultaneously (e.g. unrecognised
		frames relayed, whilst recognised frames causing Reflex actions)
		Multiple event triggers
		Extensive control over Reflex functionality
		Capable of auto-decoding 'Philips RC5' protocol frames into 2 byte format
		User control of 'Repmatic' rate (similar to typematic rate for keyboards)
		External IR sensor connection (allows main module to be hidden e.g. within
		ceiling cavity)
		Module initialise trigger
		Infrared activity indicator LED
		Status indicator LED
		Fully IDRANet compatible
		Click arrow to download datasheet

	ITM001 : Infrared Transmitter
		Can emit any one of up to 140 user trained codes from onboard non-volatile
		memory, allowing efficient single packet control of 140 domestic appliance
		functions per module
		Specific support for direct generation of 'Philips RC5' protocol frames
		Arbitrary frames can be assembled / emitted using network transmitted
		data allowing, for example, extra frame storage on a central server
		Assembly / emission of IR code data from any other IR RX module on the
		network - provides 'remote control extender' functionality
		External IR transmitter connection (allows guaranteed optical coupling to
		target device)
		Module initialise trigger
		Infrared activity indicator LED
		Status indicator LED
		Fully IDRANet compatible
		Click arrow to download datasheet

	ITR001 : Infrared Transceiver
		Can recognise (for Reflex) up to 16 arbitrary frames from standard IR
		remote controls
		Incoming frame data can be relayed to networked IR TX capable modules to
		provide ‘remote control extender’ function. Relay addressing user definable.
		Recognition / relay functions operate simultaneously (e.g. unrecognised
		frames relayed, whilst recognised frames causing Reflex actions)
		Multiple event triggers
		Extensive control over Reflex functionality
		Capable of auto-decoding 'Philips RC5' protocol frames into 2 byte format
		User control of 'Repmatic' rate (similar to typematic rate for keyboards)
		External IR sensor connection (allows main module to be hidden eg. within
		ceiling cavity)
		Can emit up to 140 user codes from non-volatile memory, allowing single
		packet control of 140 domestic appliance functions per module
		Specific support for direct generation of 'Philips RC5' protocol frames
		Arbitrary frames can be assembled / emitted using network transmitted
		data allowing, for example, extra frame storage on a central server
		Assembly / emission of IR code data from any other IR RX module on the
		network - provides 'remote control extender' functionality
		External IR transmitter connection (allows guaranteed optical coupling to
		target device)
		Module initialise trigger
		Infrared activity indicator LED
		Status indicator LED
		Fully IDRANet compatible
		Click arrow to download datasheet

	DFPH02 : Multifunction Display Panel
		15 x Push Button Inputs
		15 x Blue / Red backlights with brightness control
		64 x 128 Pixel LCD display
		LCD has RGB backlight and brightness control
		2 x Concealed Tactile Buttons (e.g. for volume control)
		PIR Detector 5m Range, 82°V x 100°H
		Light Level Sensor (8bit)
		Temperature Sensor (13bit, 0.03125°C res., +/-0.5°C)
		Relative Humidity sensor (12bit, +/-2%)
		2 x Independent Digital Inputs
		4 x Relay drive outputs (suitable for 2 x XRM-001 Modules)
		IR Receiver trainable to most handsets
		16 x Onboard stores for arbitrary frame sets
		IR Transmitter for control of 3rd party appliances
		140 onboard stores for arbitrary frame sets
		RC5 decoding / Direct synthesis of RC5 codes
		'Hands Free' networked intercom :
			Uses IDRANet audio bus allowing multi-way conversations
			Network controllable: Hands free, receive only, transmit only
			Network and locally controllable volume level
		2 x Independent chronometers (with leap year correction)
		2 x Independent interval timers
		44 x different event triggers
		Fully IDRANet compatible
		Click arrow to download datasheet