Modules are supplied with pattress fixing screws but are not supplied with IDRANet plugs (CON0002).
Visit the Accessories page for more information.
  PCD001 : PC/IDRANet RS232 Interface

     
 
Standard 9 Way RS232 Serial Port (Male)
 
Connection to a PC made via standard serial cable
 
IDRANet/RS232 indicator LEDs
 
Baud rate selectable RS232 interface (to 56.7Kbaud) with CTS handshake
 
Module reset via RS232 signal line
 
5 data bus interface settings including: Pass through, filtered, snoop,
 
gateway
 
Updateable firmware allows improvement upgrades
 
Status indicator LED
 
Fully IDRANet Compatible
 
Click arrow to download datasheet
     
     
     
     


       
  PCA001 : PC/IDRANet RS232 + Audio Interface

     
 
Standard 9 Way RS232 Serial Port (Male)
 
Note: Connection to a PC must be made via the IDRATEK Cable (CBA-001),
    and not a standard serial cable.
 
IDRANet/RS232 indicator LEDs
 
Baud rate selectable RS232 interface (to 56.7Kbaud) with CTS handshake
 
Module reset via RS232 signal line
 
5 data bus interface settings including: Pass through, filtered, snoop,
 
gateway
 
Audio bus output interface with digital gain control and isolation switch
 
Audio bus input interface with digital gain control
 
Audio bus mean level threshold sense with digital threshold setting
 
Updateable firmware allows improvement upgrades
 
Fully IDRANet Compatible
 
Status indicator LED
 
Click arrow to download datasheet


       
  XGW001 : X10 Gateway

     
 
Connection to CM12U (or equivalent) via CM12U supplied serial cable (RJ11
    to 9 Way D)
 
Fully IDRANet Compatible
 
Status indicator LED
 
Communication indicator LEDs
 
Allows control of X10 modules from IDRANet devices
 
Allows incoming X10 data to be passed to IDRANet and thus to control other
 
IDRANet devices
 
Click arrow to download datasheet