Modules are supplied with pattress fixing screws but are not supplied with IDRANet plugs (CON0002). Visit the Accessories page for more information.
	MPD001 : Mini Power Distributor
		4 x IDRANet spur connection headers
		Power bus fuse on each spur (1A each)
		Power indicator LED for each spur
		2.1mm DC jack connection point for external DC supply
		Alternative terminal block style connection point for DC supply
		DC Supply reverse polarity protection
		DC supply protection fuse (2A)
		Digital and audio bus loading circuits
		Transient protection circuits
		Click arrow to download datasheet

	PSU001 : Switch Mode Power Supply
		Switch mode power supply suitable for MPD-001
		Regulated 12V DC output
		1.5A maximum output current
		Input voltage 90 - 264 Vac
		Input frequency 47 - 63Hz
		Output voltage regulation <±5%
		(Actual product may differ from that shown)

	PSU002 : Switch Mode Power Supply
		DIN rail 60W switch mode power supply
		Regulated 24V DC output at 1.5A (maximum)
		Input voltage 88 - 264 Vac
		Output voltage regulation ±1%
		Ideal for powering 24V radiator valve actuators (RVA-001)
		Click arrow to download datasheet

	IPD001 : Intelligent Power Distributor
		4 x Switched spurs up to 1A each (1 x IDRANet connector per spur)
		1 x Always-on spur up to 1A (load on all spurs must be <1A)
		Data bus and power isolation on each spur
		Each spur double protected using electronic trip and mechanical fuse
		Current measurement resolution of 5mA per spur (sampled at 40Hz)
		Current levels on any spur can be interrogated at any time
		All four channels capable of independent Reflex functions
		Three independent Reflex triggers for each channel :
			Current level equals or exceeds user defined 'High' limit
			Current level equals or exceeds user defined 'Low' limit
			Current level equals or exceeds user defined 'Delta' limit (auto-datum)
		Module initialise trigger
		Chronometer with leap year correction and Reflex functions :

			Two independent chronometer based Reflex triggers
			Two independent time interval based Reflex triggers
		Two independent time interval based Reflex triggers
		Each event trigger can generate a predefined response and/or several user programmable responses
		Spur power indicator LEDs
		Mains detected indicator LED
		Battery detected indicator LED
		Status indicator LED
		Fully IDRANet compatible
		Click arrow to download datasheet

	IPS002 : Intelligent Power Supply
		Contains IPD-001 Intelligent Power Distribution Module (above)
		Input voltage 88 - 264Vac
		Input frequency 47 - 63Hz
		Input current 1.2A (at 230Vac)
		Key secured enclosure with window for viewing indicator LEDs
		Internal manually operated power down switch
		Enclosure tamper detection
		Additional 6M space (105mm) for additional DIN modules
		Supplied with 4Ah Sealed Lead Acid Gel battery for back-up protection
		Supplied with 2 metres of 6A flex for connection to protected supply
		Click arrow to download datasheet
		Click arrow to download installation guide