Modules are supplied with pattress fixing screws but are not supplied with IDRANet plugs (CON0002). Visit the Accessories page for more information.
	ODO001 : Octal Digital Output
		8 x 0-5V Uncommitted Logic Outputs (non-isolated, un-buffered)
		Maximum current sink per output 20mA (80mA total)
		Maximum source per output 1mA (5mA total)
		All output states can be interrogated at any time
		Highly flexible static output state modification
		e.g. WRITE/SET/CLEAR/TOGGLE any group or individual
		Module startup output states are user programmable
		Powerful programmable dynamic output functions include:
			Single shot: Delay, activity time, post activity state
			Toggle: Period, duration
			PWM: Mark, space, duty cycle
		Status indicator LED
		Fully IDRANet Compatible
		Click arrow to download datasheet

	DIO001 : Quad Digital Input / Output
		4 x 0-5V Digital Outputs (non-isolated, unbuffered)
		Maximum current sink per output 20mA (80mA total)
		Maximum source per output 1mA (5mA total)
		4 x Digital Inputs (non-isolated)
		All input and output states can be interrogated at any time
		Highly flexible static LED state modification e.g. WRITE / SET / CLEAR /
		TOGGLE any group or individual
		Module startup output states are user programmable
		Powerful programmable dynamic output functions include:
			Single shot: Delay, activity time, post activity state
			Toggle: Period, duration
			PWM: Mark, space, duty cycle
		All Inputs can provide independent event triggers with mode programmable
		trigger gating : e.g. trigger on High->Low, trigger on Low->High, trigger on
		either transition, trigger and latch
		Each event trigger can generate a predefined response and/or several user
		programmable responses
		Status indicator LED
		Fully IDRANet compatible
		Module initialise trigger
		Click arrow to download datasheet

	DRB001 : Dual 4A Relays/Buttons/LEDs/Inputs
		2 x Click Effect Push Button Inputs
		2 x Non-Isolated Digital Inputs (Filtered)
		2 x LED Indicator Outputs
		2 x Relay Outputs (SPNO 5A/230Vac fused at 4A with TVS protection)
		Status indicator LED
		All input and output states can be interrogated at any time
		Highly flexible static output state modification e.g. WRITE / SET / CLEAR /
		TOGGLE any group or individual
		Module startup output states are user programmable
		Powerful programmable dynamic output functions include :
			Single shot: Delay, activity time, post activity state
			Toggle: Period, duration
			PWM: Mark, space, duty cycle
		All input devices can provide independent event triggers with mode
		programmable trigger gating : e.g. trigger on High->Low, trigger on

		Low->High trigger on either transition, trigger and latch
		Each event trigger can generate a predefined response and/or several user programmable responses
		Module initialise trigger
		Fully IDRANet compatible
		Click arrow to download datasheet

	SRH001 : Single 10A Relay/Button/LED/Inputs
		1 x Click Effect Push Button Input
		2 x Non-Isolated Digital Inputs (Filtered)
		LED Indicator Output
		1 x Relay Output (SPCO 13A/230Vac fused at 10A with TVS protection)
		Status indicator LED
		All input and output states can be interrogated at any time
		Highly flexible static output state modification e.g. WRITE / SET / CLEAR /
		TOGGLE any group or individual
		Module startup output states are user programmable
		Powerful programmable dynamic output functions include :
			Single shot: Delay, activity time, post activity state
			Toggle: Period, duration
			PWM: Mark, space, duty cycle
		All input devices can provide independent event triggers with mode
		programmable trigger gating : e.g. trigger on High->Low, trigger on
		Low->High, trigger on either transition, trigger and latch
		Each event trigger can generate a predefined response and/or several user
		programmable responses
		Module initialise trigger
		Fully IDRANet compatible
		Click arrow to download datasheet
		How To Wire SRH-002 Modules

	DRH001 : Dual 13A Relays/LEDs/Inputs
		2 x Non-Isolated Digital Inputs (Filtered)
		2 x Relay Outputs (SPCO 13A/230Vac Non fused but with TVS protection)
		LED Indicator Outputs
		Status indicator LED
		All input and output states can be interrogated at any time
		Highly flexible static output state modification e.g. WRITE / SET / CLEAR /
		TOGGLE any group or individual
		Module startup output states are user programmable
		Powerful programmable dynamic output functions include :
			Single shot: Delay, activity time, post activity state
			Toggle: Period, duration
			PWM: Mark, space, duty cycle
		All inputs can provide independent event triggers with mode programmable
		trigger gating : e.g. trigger on High->Low, trigger on Low->High, trigger on
		either transition, trigger and latch
		Each event trigger can generate a predefined response and/or several user
		programmable responses
		Module initialise trigger
		Fully IDRANet compatible
		Click arrow to download datasheet
		How To Wire DRH-002 Modules

	QRI002 : Quad 4A Relays / LEDs / Inputs
		4 x Non-Isolated Digital Inputs (Filtered)
		4 x Relay Outputs (SPNO 5A/230Vac fused at 4A with TVS protection)
		4 x Relay Indicator LED Outputs
		Status indicator LED
		All input and output states can be interrogated at any time
		Highly flexible static output state modification e.g. WRITE / SET / CLEAR /
		TOGGLE any group or individual
		Module startup output states are user programmable
		Powerful programmable dynamic output functions include :
			Single shot: Delay, activity time, post activity state
			Toggle: Period, duration
			PWM: Mark, space, duty cycle
		All inputs can provide independent event triggers with mode programmable
		trigger gating : e.g. trigger on High->Low, trigger on Low->High, trigger on
		either transition, trigger and latch
		Each event trigger can generate a predefined response and/or several user
		programmable responses
		Module initialise trigger
		Fully IDRANet compatible
		Fits standard 35mm DIN rail, width 5M (88mm)
		Click arrow to download datasheet

	QRH001 : Quad 13A Relays / LEDs / Inputs
		4 x Non-Isolated Digital Inputs (Filtered)
		4 x Relay Output (SPCO 13A/230Vac Non fused but with TVS protection)
		4 x Relay Indicator LED Outputs
		Status indicator LED
		All input and output states can be interrogated at any time
		Highly flexible static output state modification e.g. WRITE / SET / CLEAR /
		TOGGLE any group or individual
		Module startup output states are user programmable
		Powerful programmable dynamic output functions include :
			Single shot: Delay, activity time, post activity state
			Toggle: Period, duration
			PWM: Mark, space, duty cycle
		All inputs can provide independent event triggers with mode programmable
		trigger gating : e.g. trigger on High->Low, trigger on Low->High, trigger on
		either transition, trigger and latch
		Each event trigger can generate a predefined response and/or several user
		programmable responses
		Module initialise trigger
		Fully IDRANet compatible
		Fits standard 35mm DIN rail, width 6M (106mm)
		Click arrow to download datasheet

	DFPH02 : Multifunction Display Panel
		15 x Push Button Inputs
		15 x Blue / Red backlights with brightness control
		64 x 128 Pixel LCD display
		LCD has RGB backlight and brightness control
		2 x Concealed Tactile Buttons (e.g. for volume control)
		PIR Detector 5m Range, 82°V x 100°H
		Light Level Sensor (8bit)
		Temperature Sensor (13bit, 0.03125°C res., +/-0.5°C)
		Relative Humidity sensor (12bit, +/-2%)
		2 x Independent Digital Inputs
		4 x Relay drive outputs (suitable for 2 x XRM-001 Modules)
		IR Receiver trainable to most handsets
		16 x Onboard stores for arbitrary frame sets
		IR Transmitter for control of 3rd party appliances
		140 onboard stores for arbitrary frame sets
		RC5 decoding / Direct synthesis of RC5 codes
		'Hands Free' networked intercom :
			Uses IDRANet audio bus allowing multi-way conversations
			Network controllable: Hands free, receive only, transmit only
			Network and locally controllable volume level
		2 x Independent chronometers (with leap year correction)
		2 x Independent interval timers
		44 x different event triggers
		Fully IDRANet compatible
		Click arrow to download datasheet
		How To Wire DFP-H02 Modules

	QAO001 : Quad Analogue Output
		Number of channels: 4 (NON-ISOLATED)
		Nominal output voltage range: 0V to +10V
		Max. output current: 30mA per channel @10V, 50mA aggregate
		Resolution over range: 10 bits monotonic
		Internal update rate ~10Hz
		Output levels can be set independently at any time
		Simultaneous group settings possible
		Independent Ramp function on each channel (8 bit resolution)
			User selectable ramp rates: 0.04-5V / 0.1s or 0.04-5V / s
		Independent User Defined Profiles for each channel (10 bit resolution)
			Control over individual step dwell interval (range 0.1s - 127s)
			No limit on profile lengths up to memory limits (>5K points)
			Cyclic profiles and profile sharing possible
			Profile data retained in non-volatile re-programmable memory
		User definable initial output values
		Module Initialise trigger
		Status indicator LED
		Fully IDRANet compatible
		Click arrow to download datasheet

	SLD002 : Single 250W Light Dimmer
		2 x Push Button Inputs
		2 x LED Indicators
		2 x General purpose LED Indicator Output
		Status indicator LED
		Maximum power: 250W incandescent (min 15W)
		Voltage: 200-250V@50Hz AC
		Electronic overload protected
		Inherent soft start
		Dimming range: 0-98% (power linearised)
		Dimming Resolution: 0-255
		Static or Dynamic output level can be set via IDRANet (or button) at any
		time, allowing multiple unit scene setting via Cortex or by any networked
		input device
		Local control modes via onboard button
		Ramp function with user definable rate
		User definable free form dynamic profiles
			Profile data retained in non-volatile re-programmable memory
			Control over individual step dwell interval
			Profile lengths up to memory limits
			Cyclic profiles possible
		User definable initial output value
		Onboard push button and LED have full Reflex as well as local function
		capability
		Module Initialise trigger
		Fully IDRANet compatible
		Click arrow to download datasheet

	QLD001 : Quad 250W Light Dimmer
		Designed to fit standard 35mm DIN rail (6M wide)
		4 x 250W channels (leading edge phase control)
		Output capacity 250W / 250Vac / 50Hz per channel
		Fuse protected outputs
		Thermal overload protection (self resetting)
		Dimming range: 0-100% (power linearised)
		Dimming Resolution: 8 bits (0-255)
		Channel status indicator LEDs
		Status indicator LED
		8 x General purpose non-Isolated digital inputs (filtered)
		Static or Dynamic output level can be set via IDRANet (or input) at any time,
		allowing direct control or scene setting via Cortex or by any networked input
		device
		Digital inputs have full reflex as well as pre-defined local function capabilities
		Independent channel ramp functions with user definable endpoints and rates
		User definable free form dynamic profiles
			Profile data retained in non-volatile re-programmable memory
			Control over individual step dwell interval
			Profile lengths up to memory limits
			Cyclic profiles possible
		User definable initial output states
		Mains and over temperature trip status reporting to IDRANet
		Automatic output level change reporting to IDRANet
		Module Initialise trigger
		Fully IDRANet compatible
		Click arrow to download datasheet

	XRM001 : External Relay Module (for DFPH02)
		2 x SPCO Relay Outputs
		Fused at 4A/230Vac/30Vdc
		Driven from DFPH02 rear connector
		Click arrow to download datasheet
		How To Wire XRM-001 Modules