Modules are supplied with pattress fixing screws but are not supplied with IDRANet plugs (CON0002). Visit the Accessories page for more information.
	STK001 : Starter Kit Option 1
	Kit comprises of 4 IDRATEK modules, cable and Cortex software. A 12-15V DC
	supply is not provided with these kits and must be sourced separately
		MPD-001 : Mini Power Distributor
		PCD-001 : PC/IDRANet RS232 Interface
		DRB-001 : Dual 4A Relays/Buttons/LEDs/Dual Digital Input
		ITR-001 : Infrared Transceiver
		CBD-001 : PC Interface Cable (Digital Only)
		CTX-000 : Cortex (Fully functional trial version for 30 day use)
	An installation guide can be downloaded to help you setup the starter kit
	and install Cortex and the various support files

	STK002 : Starter Kit Option 2
	Kit comprises of 4 IDRATEK modules, cable and Cortex software. A 12-15V DC
	supply is not provided with these kits and must be sourced separately
		MPD-001 : Mini Power Distributor
		PCA-001 : PC/IDRANet RS232 + Audio Interface
		DRB-001 : Dual 4A Relays/Buttons/LEDs/Dual Digital Input
		ITR-001 : Infrared Transceiver
		CBA-001 : PC Interface Cable (+ Audio)
		CTX-000 : Cortex (Fully functional trial version for 30 day use)
	An installation guide can be downloaded to help you setup the starter kit
	and install Cortex and the various support files

	8WS001 : 8 Way Patchboard
		Provides a convenient way of connecting network spurs
		8 x Polarised push in connectors (6-way)
		8 x Shield Common Terminals
		Spelsberg HP100 Enclosure 113mm x 113mm x 57mm
		Click arrow to download datasheet

	6WA001 : 6 Way Patchboard
		Provides a convenient way of connecting network spurs
		6 x Polarised push in connectors (6-way)
		Click arrow to download datasheet

	4WA001 : 4 Way Patchboard
		Provides a convenient way of connecting network spurs
		4 x Polarised push in connectors (6-way)
		Unit supplied as OEM PCB only (no enclosure is provided)
		Click arrow to download datasheet

	RVA001 : Radiator Valve Actuator
		Normally open/close actuator to close/open radiator valves
		Requires 24V DC supply at 200mA (~80mA continuous when energised)
		Time to fully open / close is approximately 240 seconds
		Can replace actuator on TRVs with M30 x 1.5mm thread
		Compatible with commonly found TRVs such as :
			E.C.A (ECATRV15AW) from B&Q
			Regis from B&Q
			Honeywell VT15 / VT117
			Kudox TRV Valve from Screwfix
			Heatline LTC TRV from Screwfix
		Click arrow to download datasheet

	XRM001 : External Relay Module (for DFPH02)
		2 x SPCO Relay Outputs
		Fused at 4A/230Vac/30Vdc
		Driven from DFPH02 rear connector
		Click arrow to download datasheet
		How To Wire XRM-001 Modules